On Apache/1.3.37 (Unix) mod_throttle/3.1.2 FrontPage/5.0.2.2635 mod_psoft_traffic/0.2 mod_ssl/2.8.28 OpenSSL/0.9.8b
Under GNU General Public License
2009-01-07 21:52 @38.103.63.55 Crawled by CCBot/1.0 (+http://www.commoncrawl.org/bot.html)
tput(1) tput(1)
NAME
tput, reset - initialize a terminal or query terminfo database
SYNOPSIS
tput [-Ttype] capname [parms ... ]
tput [-Ttype] init
tput [-Ttype] reset
tput [-Ttype] longname
tput -S <<
tput -V
DESCRIPTION
The tput utility uses the terminfo database to make the values of terminal-depen-
dent capabilities and information available to the shell (see sh(1)), to initialize
or reset the terminal, or return the long name of the requested terminal type. The
result depends upon the capability's type:
string
tput writes the string to the standard output. No trailing newline is
supplied.
integer
tput writes the decimal value to the standard output, with a trailing
newline.
boolean
tput simply sets the exit code (0 for TRUE if the terminal has the
capability, 1 for FALSE if it does not), and writes nothing to the
standard output.
Before using a value returned on the standard output, the application should test
the exit code (e.g., $?, see sh(1)) to be sure it is 0. (See the EXIT CODES and
DIAGNOSTICS sections.) For a complete list of capabilities and the capname associ-
ated with each, see terminfo(1).
-Ttype indicates the type of terminal. Normally this option is unnecessary,
because the default is taken from the environment variable TERM. If -T is
specified, then the shell variables LINES and COLUMNS will be ignored,and
the operating system will not be queried for the actual screen size.
capname
indicates the capability from the terminfo database. When termcap support
is compiled in, the termcap name for the capability is also accepted.
parms If the capability is a string that takes parameters, the arguments parms
will be instantiated into the string.
Most parameters are numbers. Only a few terminfo capabilities require
string parameters; tput uses a table to decide which to pass as strings.
Normally tput uses tparm (3X) to perform the substitution. If no parameters
are given for the capability, tput writes the string without performing the
substitution.
-S allows more than one capability per invocation of tput. The capabilities
must be passed to tput from the standard input instead of from the command
line (see example). Only one capname is allowed per line. The -S option
changes the meaning of the 0 and 1 boolean and string exit codes (see the
EXIT CODES section).
Again, tput uses a table and the presence of parameters in its input to
decide whether to use tparm (3X), and how to interpret the parameters.
-V reports the version of ncurses which was used in this program, and exits.
init If the terminfo database is present and an entry for the user's terminal
exists (see -Ttype, above), the following will occur:
(1) if present, the terminal's initialization strings will be output as
detailed in the terminfo(5) section on Tabs and Initialization,
(2) any delays (e.g., newline) specified in the entry will be set in the
tty driver,
(3) tabs expansion will be turned on or off according to the specifica-
tion in the entry, and
(4) if tabs are not expanded, standard tabs will be set (every 8 spaces).
If an entry does not contain the information needed for any of the four
above activities, that activity will silently be skipped.
reset Instead of putting out initialization strings, the terminal's reset strings
will be output if present (rs1, rs2, rs3, rf). If the reset strings are not
present, but initialization strings are, the initialization strings will be
output. Otherwise, reset acts identically to init.
longname
If the terminfo database is present and an entry for the user's terminal
exists (see -Ttype above), then the long name of the terminal will be put
out. The long name is the last name in the first line of the terminal's
description in the terminfo database [see term(5)].
If tput is invoked by a link named reset, this has the same effect as tput reset.
See tset for comparison, which has similar behavior.
EXAMPLES
tput init
Initialize the terminal according to the type of terminal in the environmental
variable TERM. This command should be included in everyone's .profile after
the environmental variable TERM has been exported, as illustrated on the pro-
file(5) manual page.
tput -T5620 reset
Reset an AT&T 5620 terminal, overriding the type of terminal in the environ-
mental variable TERM.
tput cup 0 0
Send the sequence to move the cursor to row 0, column 0 (the upper left corner
of the screen, usually known as the "home" cursor position).
tput clear
Echo the clear-screen sequence for the current terminal.
tput cols
Print the number of columns for the current terminal.
tput -T450 cols
Print the number of columns for the 450 terminal.
bold='tput smso' offbold='tput rmso'
Set the shell variables bold, to begin stand-out mode sequence, and offbold,
to end standout mode sequence, for the current terminal. This might be fol-
lowed by a prompt: echo "${bold}Please type in your name: ${offbold}\c"
tput hc
Set exit code to indicate if the current terminal is a hard copy terminal.
tput cup 23 4
Send the sequence to move the cursor to row 23, column 4.
tput cup
Send the terminfo string for cursor-movement, with no parameters substituted.
tput longname
Print the long name from the terminfo database for the type of terminal speci-
fied in the environmental variable TERM.
tput -S <<!
> clear
> cup 10 10
> bold
> !
This example shows tput processing several capabilities in one invocation. It
clears the screen, moves the cursor to position 10, 10 and turns on bold
(extra bright) mode. The list is terminated by an exclamation mark (!) on a
line by itself.
FILES
/usr/share/terminfo
compiled terminal description database
/usr/share/tabset/*
tab settings for some terminals, in a format appropriate to be output to the
terminal (escape sequences that set margins and tabs); for more information,
see the "Tabs and Initialization" section of terminfo(5)
EXIT CODES
If the -S option is used, tput checks for errors from each line, and if any errors
are found, will set the exit code to 4 plus the number of lines with errors. If no
errors are found, the exit code is 0. No indication of which line failed can be
given so exit code 1 will never appear. Exit codes 2, 3, and 4 retain their usual
interpretation. If the -S option is not used, the exit code depends on the type of
capname:
boolean
a value of 0 is set for TRUE and 1 for FALSE.
string a value of 0 is set if the capname is defined for this terminal type
(the value of capname is returned on standard output); a value of 1 is
set if capname is not defined for this terminal type (nothing is writ-
ten to standard output).
integer
a value of 0 is always set, whether or not capname is defined for this
terminal type. To determine if capname is defined for this terminal
type, the user must test the value written to standard output. A value
of -1 means that capname is not defined for this terminal type.
other reset or init may fail to find their respective files. In that case,
the exit code is set to 4 + errno.
Any other exit code indicates an error; see the DIAGNOSTICS section.
DIAGNOSTICS
tput prints the following error messages and sets the corresponding exit codes.
exit code error message
---------------------------------------------------------------------
0 (capname is a numeric variable that is not specified in
the terminfo(1) database for this terminal type, e.g.
tput -T450 lines and tput -T2621 xmc)
1 no error message is printed, see the EXIT CODES section.
2 usage error
3 unknown terminal type or no terminfo database
4 unknown terminfo capability capname
>4 error occurred in -S
---------------------------------------------------------------------
PORTABILITY
The longname and -S options, and the parameter-substitution features used in the
cup example, are not supported in BSD curses or in AT&T/USL curses before SVr4.
X/Open documents only the operands for clear, init and reset. In this implementa-
tion, clear is part of the capname support. Other implementations of tput on
SVr4-based systems such as Solaris, IRIX64 and HPUX as well as others such as AIX
and Tru64 provide support for capname operands. A few platforms such as FreeBSD
and NetBSD recognize termcap names rather than terminfo capability names in their
respective tput commands.
SEE ALSO
clear(1), stty(1), tabs(1), terminfo(5).
This describes ncurses version 5.5 (patch 20060715).
tput(1)
Generated by $Id: phpMan.php,v 4.49 2006/02/26 13:18:18 chedong Exp $ Author: Che Dong
On Apache/1.3.37 (Unix) mod_throttle/3.1.2 FrontPage/5.0.2.2635 mod_psoft_traffic/0.2 mod_ssl/2.8.28 OpenSSL/0.9.8b
Under GNU General Public License
2009-01-07 21:52 @38.103.63.55 Crawled by CCBot/1.0 (+http://www.commoncrawl.org/bot.html)