On Apache/1.3.37 (Unix) mod_throttle/3.1.2 FrontPage/5.0.2.2635 mod_psoft_traffic/0.2 mod_ssl/2.8.28 OpenSSL/0.9.8b
Under GNU General Public License
2009-01-07 20:23 @38.103.63.55 Crawled by CCBot/1.0 (+http://www.commoncrawl.org/bot.html)
SIGACTION(2) Linux Programmer's Manual SIGACTION(2)
NAME
sigaction - examine and change a signal action
SYNOPSIS
#include <signal.h>
int sigaction(int signum, const struct sigaction *act, struct sigaction *oldact);
DESCRIPTION
The sigaction() system call is used to change the action taken by a process on
receipt of a specific signal.
signum specifies the signal and can be any valid signal except SIGKILL and SIGSTOP.
If act is non-null, the new action for signal signum is installed from act. If
oldact is non-null, the previous action is saved in oldact.
The sigaction structure is defined as something like
struct sigaction {
void (*sa_handler)(int);
void (*sa_sigaction)(int, siginfo_t *, void *);
sigset_t sa_mask;
int sa_flags;
void (*sa_restorer)(void);
}
On some architectures a union is involved: do not assign to both sa_handler and
sa_sigaction.
The sa_restorer element is obsolete and should not be used. POSIX does not specify
a sa_restorer element.
sa_handler specifies the action to be associated with signum and may be SIG_DFL for
the default action, SIG_IGN to ignore this signal, or a pointer to a signal han-
dling function. This function receives the signal number as its only argument.
If SA_SIGINFO is specified in sa_flags, then sa_sigaction (instead of sa_handler)
specifies the signal-handling function for signum. This function receives the sig-
nal number as its first argument, a pointer to a siginfo_t as its second argument
and a pointer to a ucontext_t (cast to void *) as its third argument.
sa_mask gives a mask of signals which should be blocked during execution of the
signal handler. In addition, the signal which triggered the handler will be
blocked, unless the SA_NODEFER flag is used.
sa_flags specifies a set of flags which modify the behaviour of the signal handling
process. It is formed by the bitwise OR of zero or more of the following:
SA_NOCLDSTOP
If signum is SIGCHLD, do not receive notification when child pro-
cesses stop (i.e., when they receive one of SIGSTOP, SIGTSTP, SIGTTIN
or SIGTTOU) or resume (i.e., they receive SIGCONT) (see wait(2)).
SA_NOCLDWAIT
(Linux 2.6 and later) If signum is SIGCHLD, do not transform children
into zombies when they terminate. See also waitpid(2).
SA_RESETHAND
Restore the signal action to the default state once the signal han-
dler has been called. SA_ONESHOT is an obsolete, non-standard syn-
onym for this flag.
SA_ONSTACK
Call the signal handler on an alternate signal stack provided by
sigaltstack(2). If an alternate stack is not available, the default
stack will be used.
SA_RESTART
Provide behaviour compatible with BSD signal semantics by making cer-
tain system calls restartable across signals.
SA_NODEFER
Do not prevent the signal from being received from within its own
signal handler. SA_NOMASK is an obsolete, non-standard synonym for
this flag.
SA_SIGINFO
The signal handler takes 3 arguments, not one. In this case,
sa_sigaction should be set instead of sa_handler. (The sa_sigaction
field was added in Linux 2.1.86.)
The siginfo_t parameter to sa_sigaction is a struct with the following elements
siginfo_t {
int si_signo; /* Signal number */
int si_errno; /* An errno value */
int si_code; /* Signal code */
pid_t si_pid; /* Sending process ID */
uid_t si_uid; /* Real user ID of sending process */
int si_status; /* Exit value or signal */
clock_t si_utime; /* User time consumed */
clock_t si_stime; /* System time consumed */
sigval_t si_value; /* Signal value */
int si_int; /* POSIX.1b signal */
void * si_ptr; /* POSIX.1b signal */
void * si_addr; /* Memory location which caused fault */
int si_band; /* Band event */
int si_fd; /* File descriptor */
}
si_signo, si_errno and si_code are defined for all signals. (si_signo is unused on
Linux.) The rest of the struct may be a union, so that one should only read the
fields that are meaningful for the given signal. POSIX.1b signals and SIGCHLD fill
in si_pid and si_uid. SIGCHLD also fills in si_status, si_utime and si_stime.
si_int and si_ptr are specified by the sender of the POSIX.1b signal. SIGILL,
SIGFPE, SIGSEGV, and SIGBUS fill in si_addr with the address of the fault. SIGPOLL
fills in si_band and si_fd.
si_code indicates why this signal was sent. It is a value, not a bitmask. The
values which are possible for any signal are listed in this table:
+-------------------------------------------------------------------+
| si_code |
+-----------+-------------------------------------------------------+
|Value | Signal origin |
+-----------+-------------------------------------------------------+
|SI_USER | kill(), sigsend(), or raise() |
+-----------+-------------------------------------------------------+
|SI_KERNEL | The kernel |
+-----------+-------------------------------------------------------+
|SI_QUEUE | sigqueue() |
+-----------+-------------------------------------------------------+
|SI_TIMER | POSIX timer expired |
+-----------+-------------------------------------------------------+
|SI_MESGQ | POSIX message queue state changed (since Linux 2.6.6) |
+-----------+-------------------------------------------------------+
|SI_ASYNCIO | AIO completed |
+-----------+-------------------------------------------------------+
|SI_SIGIO | queued SIGIO |
+-----------+-------------------------------------------------------+
|SI_TKILL | tkill() or tgkill() (since Linux 2.4.19) |
+-----------+-------------------------------------------------------+
+-------------------------------------+
| SIGILL |
+-----------+-------------------------+
|ILL_ILLOPC | illegal opcode |
+-----------+-------------------------+
|ILL_ILLOPN | illegal operand |
+-----------+-------------------------+
|ILL_ILLADR | illegal addressing mode |
+-----------+-------------------------+
|ILL_ILLTRP | illegal trap |
+-----------+-------------------------+
|ILL_PRVOPC | privileged opcode |
+-----------+-------------------------+
|ILL_PRVREG | privileged register |
+-----------+-------------------------+
|ILL_COPROC | coprocessor error |
+-----------+-------------------------+
|ILL_BADSTK | internal stack error |
+-----------+-------------------------+
+----------------------------------------------+
| SIGFPE |
+-----------+----------------------------------+
|FPE_INTDIV | integer divide by zero |
+-----------+----------------------------------+
|FPE_INTOVF | integer overflow |
+-----------+----------------------------------+
|FPE_FLTDIV | floating point divide by zero |
+-----------+----------------------------------+
|FPE_FLTOVF | floating point overflow |
+-----------+----------------------------------+
|FPE_FLTUND | floating point underflow |
+-----------+----------------------------------+
|FPE_FLTRES | floating point inexact result |
+-----------+----------------------------------+
|FPE_FLTINV | floating point invalid operation |
+-----------+----------------------------------+
|FPE_FLTSUB | subscript out of range |
+-----------+----------------------------------+
+----------------------------------------------------+
| SIGSEGV |
+------------+---------------------------------------+
|SEGV_MAPERR | address not mapped to object |
+------------+---------------------------------------+
|SEGV_ACCERR | invalid permissions for mapped object |
+------------+---------------------------------------+
+--------------------------------------------+
| SIGBUS |
+-----------+--------------------------------+
|BUS_ADRALN | invalid address alignment |
+-----------+--------------------------------+
|BUS_ADRERR | non-existent physical address |
+-----------+--------------------------------+
|BUS_OBJERR | object specific hardware error |
+-----------+--------------------------------+
+--------------------------------+
| SIGTRAP |
+-----------+--------------------+
|TRAP_BRKPT | process breakpoint |
+-----------+--------------------+
|TRAP_TRACE | process trace trap |
+-----------+--------------------+
+----------------------------------------------------------------+
| SIGCHLD |
+--------------+-------------------------------------------------+
|CLD_EXITED | child has exited |
+--------------+-------------------------------------------------+
|CLD_KILLED | child was killed |
+--------------+-------------------------------------------------+
|CLD_DUMPED | child terminated abnormally |
+--------------+-------------------------------------------------+
|CLD_TRAPPED | traced child has trapped |
+--------------+-------------------------------------------------+
|CLD_STOPPED | child has stopped |
+--------------+-------------------------------------------------+
|CLD_CONTINUED | stopped child has continued (since Linux 2.6.9) |
+--------------+-------------------------------------------------+
+-----------------------------------------+
| SIGPOLL |
+---------+-------------------------------+
|POLL_IN | data input available |
+---------+-------------------------------+
|POLL_OUT | output buffers available |
+---------+-------------------------------+
|POLL_MSG | input message available |
+---------+-------------------------------+
|POLL_ERR | i/o error |
+---------+-------------------------------+
|POLL_PRI | high priority input available |
+---------+-------------------------------+
|POLL_HUP | device disconnected |
+---------+-------------------------------+
RETURN VALUE
sigaction() returns 0 on success and -1 on error.
ERRORS
EFAULT act or oldact points to memory which is not a valid part of the process
address space.
EINVAL An invalid signal was specified. This will also be generated if an attempt
is made to change the action for SIGKILL or SIGSTOP, which cannot be caught
or ignored.
NOTES
According to POSIX, the behaviour of a process is undefined after it ignores a
SIGFPE, SIGILL, or SIGSEGV signal that was not generated by kill() or raise().
Integer division by zero has undefined result. On some architectures it will gen-
erate a SIGFPE signal. (Also dividing the most negative integer by -1 may generate
SIGFPE.) Ignoring this signal might lead to an endless loop.
POSIX.1-1990 disallowed setting the action for SIGCHLD to SIG_IGN. POSIX.1-2001
allows this possibility, so that ignoring SIGCHLD can be used to prevent the cre-
ation of zombies (see wait(2)). Nevertheless, the historical BSD and System V
behaviours for ignoring SIGCHLD differ, so that the only completely portable method
of ensuring that terminated children do not become zombies is to catch the SIGCHLD
signal and perform a wait(2) or similar.
POSIX.1-1990 only specified SA_NOCLDSTOP. POSIX.1-2001 added SA_NOCLDWAIT,
SA_RESETHAND, SA_NODEFER, and SA_SIGINFO. Use of these latter values in sa_flags
may be less portable in applications intended for older Unix implementations.
Support for SA_SIGINFO was added in Linux 2.2.
The SA_RESETHAND flag is compatible with the SVr4 flag of the same name.
The SA_NODEFER flag is compatible with the SVr4 flag of the same name under kernels
1.3.9 and newer. On older kernels the Linux implementation allowed the receipt of
any signal, not just the one we are installing (effectively overriding any sa_mask
settings).
sigaction() can be called with a null second argument to query the current signal
handler. It can also be used to check whether a given signal is valid for the cur-
rent machine by calling it with null second and third arguments.
It is not possible to block SIGKILL or SIGSTOP (by specifying them in sa_mask).
Attempts to do so are silently ignored.
See sigsetops(3) for details on manipulating signal sets.
BUGS
In kernels up to and including 2.6.13, specifying SA_NODEFER in sa_flags preventing
not only the delivered signal from being masked during execution of the handler,
but also the signals specified in sa_mask. This bug is was fixed in kernel 2.6.14.
CONFORMING TO
POSIX.1-2001, SVr4.
UNDOCUMENTED
Before the introduction of SA_SIGINFO it was also possible to get some additional
information, namely by using a sa_handler with second argument of type struct sig-
context. See the relevant kernel sources for details. This use is obsolete now.
SEE ALSO
kill(1), kill(2), pause(2), sigaltstack(2), signal(2), sigpending(2), sigproc-
mask(2), sigqueue(2), sigsuspend(2), wait(2), killpg(3), raise(3), siginterrupt(3),
sigsetops(3), sigvec(3), core(5), signal(7)
Linux 2.6.14 2005-09-15 SIGACTION(2)
Generated by $Id: phpMan.php,v 4.49 2006/02/26 13:18:18 chedong Exp $ Author: Che Dong
On Apache/1.3.37 (Unix) mod_throttle/3.1.2 FrontPage/5.0.2.2635 mod_psoft_traffic/0.2 mod_ssl/2.8.28 OpenSSL/0.9.8b
Under GNU General Public License
2009-01-07 20:23 @38.103.63.55 Crawled by CCBot/1.0 (+http://www.commoncrawl.org/bot.html)