sane-s9036 - phpMan

sane-s9036(5) SANE Scanner Access Now Easy sane-s9036(5)

NAME
sane-s9036 - SANE backend for Siemens 9036 flatbed scanners

DESCRIPTION
The sane-s9036 library implements a SANE (Scanner Access Now Easy) backend that
provides access to Siemens 9036 flatbed scanners.

DEVICE NAMES
This backend expects device names of the form:

special

Where special is the path-name for the special device that corresponds to a SCSI
scanner. The special device name must be a generic SCSI device or a symlink to such
a device. The program sane-find-scanner helps to find out the correct device.
Under Linux, such a device name could be /dev/sga or /dev/sge, for example. See
sane-scsi(5) for details.

FILES
/etc/sane.d/s9036.conf
The backend configuration file (see also description of SANE_CONFIG_DIR
below).

/usr/lib*/sane/libsane-s9036.a
The static library implementing this backend.

/usr/lib*/sane/libsane-s9036.so
The shared library implementing this backend (present on systems that sup-
port dynamic loading).

ENVIRONMENT
SANE_CONFIG_DIR
This environment variable specifies the list of directories that may contain
the configuration file. Under UNIX, the directories are separated by a
colon (':'), under OS/2, they are separated by a semi-colon (';'). If this
variable is not set, the configuration file is searched in two default
directories: first, the current working directory (".") and then in
/etc/sane.d. If the value of the environment variable ends with the direc-
tory separator character, then the default directories are searched after
the explicitly specified directories. For example, setting SANE_CONFIG_DIR
to "/tmp/config:" would result in directories "tmp/config", ".", and
"/etc/sane.d" being searched (in this order).

SANE_DEBUG_S9036
If the library was compiled with debug support enabled, this environment
variable controls the debug level for this backend. Higher debug levels
increase the verbosity of the output.

Example: export SANE_DEBUG_S9036=4