On Apache/1.3.37 (Unix) mod_throttle/3.1.2 FrontPage/5.0.2.2635 mod_psoft_traffic/0.2 mod_ssl/2.8.28 OpenSSL/0.9.8b
Under GNU General Public License
2008-11-21 05:59 @38.103.63.55 Crawled by CCBot/1.0 (+http://www.commoncrawl.org/bot.html)
sane-ma1509(5) SANE Scanner Access Now Easy sane-ma1509(5)
NAME
sane-ma1509 - SANE backend for Mustek BearPaw 1200F USB scanner
DESCRIPTION
The sane-ma1509 library implements a SANE (Scanner Access Now Easy) backend that
provides access to the Mustek BearPaw 1200F USB flatbed scanner. This scanner is
based on the MA-1509 chipset. Other scanners that use this chip (if they exist) may
also work.
This backend is ALPHA software. Be careful and remove the power plug immediately
if your hear unusual noises.
More details can be found on the ma1509 backend homepage http://www.meier-
geinitz.de/sane/ma1509-backend/.
Other Mustek USB scanners are supported by the gt68xx, mustek_usb and the plustek
backends. See sane-mustek_usb(5), sane-gt68xx(5) and sane-plustek(5) for details.
This backend can only work with scanners that are already detected by the operating
system. See sane-usb(5) for details.
If you own a scanner other than the Mustek BearPaw 1200F that works with this back-
end, please let me know this by sending the scanner's exact model name and the USB
vendor and device ids (e.g. from /proc/bus/usb/devices or syslog) to me.
DEVICE NAMES
This backend expects device names of the form:
special
Where special is a path-name for the special device that corresponds to a USB scan-
ner. With Linux, such a device name could be /dev/usb/scanner0 or libusb:001:002,
for example.
CONFIGURATION
The contents of the ma1509.conf file is a list of options and device names that
correspond to Mustek BearPaw 1200F scanners. Empty lines and lines starting with a
hash mark (#) are ignored.
Instead of using the device name, the scanner can be autodetected by usb vendor_id
product_id statements which are already included into ma1509.conf. This is only
supported with Linux 2.4.8 and higher and all systems that support libsub. "ven-
dor_id" and "product_id" are hexadecimal numbers that identify the scanner. If this
doesn't work, a device name must be placed in ma1509.conf as described above.
To set the time the lamp needs for warm-up, use option warmup-time in ma1509.conf.
The time is given in seconds after the option. The default is 30 seconds.
FILES
/etc/sane.d/ma1509.conf
The backend configuration file (see also description of SANE_CONFIG_DIR
below).
/usr/lib*/sane/libsane-ma1509.a
The static library implementing this backend.
/usr/lib*/sane/libsane-ma1509.so
The shared library implementing this backend (present on systems that sup-
port dynamic loading).
ENVIRONMENT
SANE_CONFIG_DIR
This environment variable specifies the list of directories that may contain
the configuration file. Under UNIX, the directories are separated by a
colon (':'), under OS/2, they are separated by a semi-colon (';'). If this
variable is not set, the configuration file is searched in two default
directories: first, the current working directory (".") and then in
/etc/sane.d. If the value of the environment variable ends with the direc-
tory separator character, then the default directories are searched after
the explicitly specified directories. For example, setting SANE_CONFIG_DIR
to "/tmp/config:" would result in directories "tmp/config", ".", and
"/etc/sane.d" being searched (in this order).
SANE_DEBUG_MA1509
If the library was compiled with debug support enabled, this environment
variable controls the debug level for this backend. Higher debug levels
increase the verbosity of the output.
SEE ALSO
sane(7), sane-usb(5), sane-gt68xx(5), sane-plustek(5), sane-mustek_usb(5), sane-
mustek(5), sane-mustek_pp(5),
http://www.meier-geinitz.de/sane/ma1509-backend/
AUTHOR
Henning Meier-Geinitz <henning AT meier-geinitz.de>
BUGS
Resolutions higher than 600 dpi don't work
Transparency adapter and automatic document feeder is not supported yet
No support for "high-speed" mode (jpeg)
More detailed bug information is available at the MA-1509 backend homepage
http://www.meier-geinitz.de/sane/ma1509-backend/.
sane-backends 1.0.18 24 Feb 2003 sane-ma1509(5)
Generated by $Id: phpMan.php,v 4.49 2006/02/26 13:18:18 chedong Exp $ Author: Che Dong
On Apache/1.3.37 (Unix) mod_throttle/3.1.2 FrontPage/5.0.2.2635 mod_psoft_traffic/0.2 mod_ssl/2.8.28 OpenSSL/0.9.8b
Under GNU General Public License
2008-11-21 05:59 @38.103.63.55 Crawled by CCBot/1.0 (+http://www.commoncrawl.org/bot.html)