netdevice - phpMan

Command: man perldoc info search(apropos)  


NETDEVICE(7)               Linux Programmer's Manual              NETDEVICE(7)



NAME
       netdevice - Low level access to Linux network devices

SYNOPSIS
       #include <sys/ioctl.h>
       #include <net/if.h>

DESCRIPTION
       This  man  page  describes the sockets interface which is used to configure network
       devices.

       Linux supports some standard ioctls to configure network devices.  They can be used
       on  any  socket's  file  descriptor regardless of the family or type.  They pass an
       ifreq structure:

       struct ifreq {
           char ifr_name[IFNAMSIZ]; /* Interface name */
           union {
               struct sockaddr ifr_addr;
               struct sockaddr ifr_dstaddr;
               struct sockaddr ifr_broadaddr;
               struct sockaddr ifr_netmask;
               struct sockaddr ifr_hwaddr;
               short           ifr_flags;
               int             ifr_ifindex;
               int             ifr_metric;
               int             ifr_mtu;
               struct ifmap    ifr_map;
               char            ifr_slave[IFNAMSIZ];
               char            ifr_newname[IFNAMSIZ];
               char *          ifr_data;
           };
       };

       struct ifconf {
           int                ifc_len; /* size of buffer */
           union {
               char *         ifc_buf; /* buffer address */
               struct ifreq * ifc_req; /* array of structures */
           };
       };

       Normally, the user specifies which device to affect by setting ifr_name to the name
       of the interface. All other members of the structure may share memory.


IOCTLS
       If  an ioctl is marked as privileged then using it requires an effective user ID of
       0 or the CAP_NET_ADMIN capability. If this is not the case EPERM will be  returned.


       SIOCGIFNAME
              Given  the  ifr_ifindex, return the name of the interface in ifr_name.  This
              is the only ioctl which returns its result in ifr_name.


       SIOCGIFINDEX
              Retrieve the interface index of the interface into ifr_ifindex.


       SIOCGIFFLAGS, SIOCSIFFLAGS
              Get or set the active flag word of the device.  ifr_flags contains a bitmask
              of the following values:


                                         Device flags
              IFF_UP            Interface is running.
              IFF_BROADCAST     Valid broadcast address set.
              IFF_DEBUG         Internal debugging flag.
              IFF_LOOPBACK      Interface is a loopback interface.
              IFF_POINTOPOINT   Interface is a point-to-point link.
              IFF_RUNNING       Resources allocated.
              IFF_NOARP         No arp protocol, L2 destination address not set.
              IFF_PROMISC       Interface is in promiscuous mode.
              IFF_NOTRAILERS    Avoid use of trailers.
              IFF_ALLMULTI      Receive all multicast packets.
              IFF_MASTER        Master of a load balancing bundle.
              IFF_SLAVE         Slave of a load balancing bundle.
              IFF_MULTICAST     Supports multicast
              IFF_PORTSEL       Is able to select media type via ifmap.
              IFF_AUTOMEDIA     Auto media selection active.
              IFF_DYNAMIC       The  addresses  are lost when the interface goes
                                down.

              Setting the active flag word is a privileged operation, but any process  may
              read it.

       SIOCGIFMETRIC, SIOCSIFMETRIC
              Get or set the metric of the device using ifr_metric.  This is currently not
              implemented; it sets ifr_metric to 0 if you attempt to read it  and  returns
              EOPNOTSUPP if you attempt to set it.

       SIOCGIFMTU, SIOCSIFMTU
              Get  or set the MTU (Maximum Transfer Unit) of a device using ifr_mtu.  Set-
              ting the MTU is a privileged operation. Setting the MTU to too small  values
              may cause kernel crashes.

       SIOCGIFHWADDR, SIOCSIFHWADDR
              Get  or set the hardware address of a device using ifr_hwaddr.  The hardware
              address is specified in a struct sockaddr.  sa_family contains the  ARPHRD_*
              device  type, sa_data the L2 hardware address starting from byte 0.  Setting
              the hardware address is a privileged operation.

       SIOCSIFHWBROADCAST
              Set the hardware broadcast address of a device from ifr_hwaddr.  This  is  a
              privileged operation.

       SIOCGIFMAP, SIOCSIFMAP
              Get  or  set the interface's hardware parameters using ifr_map.  Setting the
              parameters is a privileged operation.

              struct ifmap {
                  unsigned long   mem_start;
                  unsigned long   mem_end;
                  unsigned short  base_addr;
                  unsigned char   irq;
                  unsigned char   dma;
                  unsigned char   port;
              };

              The interpretation of the ifmap structure depends on the device  driver  and
              the architecture.

       SIOCADDMULTI, SIOCDELMULTI
              Add  an  address to or delete an address from the device's link layer multi-
              cast filters using ifr_hwaddr.  These are privileged operations.   See  also
              packet(7) for an alternative.

       SIOCGIFTXQLEN, SIOCSIFTXQLEN
              Get  or  set  the transmit queue length of a device using ifr_qlen.  Setting
              the transmit queue length is a privileged operation.

       SIOCSIFNAME
              Changes the name of the interface  specified  in  ifr_name  to  ifr_newname.
              This is a privileged operation. It is only allowed when the interface is not
              up.

       SIOCGIFCONF
              Return a list of interface (transport layer) addresses. This currently means
              only  addresses  of  the  AF_INET (IPv4) family for compatibility.  The user
              passes a ifconf structure as argument to the ioctl. It contains a pointer to
              an  array of ifreq structures in ifc_req and its length in bytes in ifc_len.
              The kernel fills the ifreqs with all current L3 interface addresses that are
              running:  ifr_name  contains  the interface name (eth0:1 etc.), ifr_addr the
              address.  The kernel returns with the actual length in ifc_len.  If  ifc_len
              is  equal  to the original length the buffer probably has overflowed and you
              should retry with a bigger buffer to  get  all  addresses.   When  no  error
              occurs the ioctl returns 0; otherwise -1. Overflow is not an error.

       Most  protocols  support  their own ioctls to configure protocol specific interface
       options. See the  protocol  man  pages  for  a  description.   For  configuring  IP
       addresses see ip(7).

       In addition some devices support private ioctls.  These are not described here.

NOTES
       Strictly speaking, SIOCGIFCONF is IP specific and belongs in ip(7).

       The  names  of interfaces with no addresses or that don't have the IFF_RUNNING flag
       set can be found via /proc/net/dev.

       Local IPv6 IP addresses can be found via /proc/net or via rtnetlink(7).

BUGS
       glibc 2.1 is missing the ifr_newname macro in net/if.h. Add the following  to  your
       program as a workaround:

              #ifndef ifr_newname
              #define ifr_newname     ifr_ifru.ifru_slave
              #endif

SEE ALSO
       capabilities(7), ip(7), proc(7), rtnetlink(7)



Linux Man Page                    1999-05-02                      NETDEVICE(7)

Generated by $Id: phpMan.php,v 4.49 2006/02/26 13:18:18 chedong Exp $ Author: Che Dong
On Apache/1.3.37 (Unix) mod_throttle/3.1.2 FrontPage/5.0.2.2635 mod_psoft_traffic/0.2 mod_ssl/2.8.28 OpenSSL/0.9.8b
Under GNU General Public License
2009-01-07 21:00 @38.103.63.55 Crawled by CCBot/1.0 (+http://www.commoncrawl.org/bot.html)
Valid XHTML 1.0!Valid CSS!