On Apache/1.3.37 (Unix) mod_throttle/3.1.2 FrontPage/5.0.2.2635 mod_psoft_traffic/0.2 mod_ssl/2.8.28 OpenSSL/0.9.8b
Under GNU General Public License
2009-01-07 08:13 @38.103.63.55 Crawled by CCBot/1.0 (+http://www.commoncrawl.org/bot.html)
/etc/isdn/callerid.conf [callerid] (5) - config file for isdnlog numbers and scripts /etc/rc.d/init.d/autofs [autofs] (8) - Control Script for automounter AnyDBM_File (3pm) - provide framework for multiple DBMs Archive::Tar (3pm) - module for manipulations of tar archives Archive::Zip (3pm) - Provide an interface to ZIP archive files Archive::Zip::FAQ (3pm) - Answers to a few frequently asked questions about Archive::Zip Archive::Zip::MemberRead (3pm) - A wrapper that lets you read Zip archive members as if they were files Archive::Zip::Tree (3pm) - (DEPRECATED) methods for adding/extracting trees using Archive::Zip CPAN::API::HOWTO (3pm) - a recipe book for programming with CPAN.pm Crypt::CBC (3pm) - Encrypt Data with Cipher Block Chaining Mode Crypt::OpenSSL::Bignum (3pm) - OpenSSL's multiprecision integer arithmetic DBD::Gofer::Transport::pipeone (3pm) - DBD::Gofer client transport for testing DBI::Gofer::Transport::pipeone (3pm) - DBD::Gofer server-side transport for pipeone DBI::ProfileData (3pm) - manipulate DBI::ProfileDumper data dumps Ekiga [ekiga] (1) - SIP and H.323 Voice over IP and Videoconferencing for UN*X ExtUtils::Miniperl (3pm) - write the C code for perlmain.c FD_CLR [select] (2) - synchronous I/O multiplexing FD_CLR [select_tut] (2) - synchronous I/O multiplexing FD_ISSET [select] (2) - synchronous I/O multiplexing FD_ISSET [select_tut] (2) - synchronous I/O multiplexing FD_SET [select] (2) - synchronous I/O multiplexing FD_SET [select_tut] (2) - synchronous I/O multiplexing FD_ZERO [select] (2) - synchronous I/O multiplexing FD_ZERO [select_tut] (2) - synchronous I/O multiplexing FindBin (3pm) - Locate directory of original perl script GNU Parted [parted] (8) - a partition manipulation program Geo::IP (3pm) - Look up country by IP Address Geo::IP::Record (3pm) - Contains city information for GeoIP City Edition IO::Compress::Gzip (3pm) - Write RFC 1952 files/buffers IO::Compress::Zip (3pm) - Write zip files/buffers IO::Pipe (3pm) - supply object methods for pipes IO::Uncompress::AnyInflate (3pm) - Uncompress zlib-based (zip, gzip) file/buffer IO::Uncompress::AnyUncompress (3pm) - Uncompress gzip, zip, bzip2 or lzop file/buffer IO::Uncompress::Gunzip (3pm) - Read RFC 1952 files/buffers IO::Uncompress::Unzip (3pm) - Read zip files/buffers IP::Authority (3pm) - fast lookup of authority by IP address IP::Country (3pm) - fast lookup of country codes from IP addresses IP::Country::Fast (3pm) - fast lookup of country codes by IP address IP::Country::MaxMind (3pm) - Look up country by IP Address IP::Country::Medium (3pm) - cached lookup of country codes by IP address and domain name IP::Country::Slow (3pm) - cached lookup of country codes by domain name and IP address IPC::Msg (3pm) - SysV Msg IPC object class IPC::Open2 (3pm) - open a process for both reading and writing IPC::Open3 (3pm) - open a process for reading, writing, and error handling IPC::Run (3pm) - system() and background procs w/ piping, redirs, ptys (Unix, Win32) IPC::Run::Debug (3pm) - debugging routines for IPC::Run IPC::Run::Win32Helper (3pm) - helper routines for IPC::Run on Win32 platforms IPC::Run::Win32IO (3pm) - helper routines for IPC::Run on Win32 platforms IPC::Run::Win32Pump (3pm) - helper processes to shovel data to/from parent, child IPC::Semaphore (3pm) - SysV Semaphore IPC object class IPC::SysV (3pm) - SysV IPC constants IPPROTO_ICMP [icmp] (7) - Linux IPv4 ICMP kernel module ImageMagick (rpm) - An X application for displaying and manipulating images. Locale::Script (3pm) - ISO codes for script identification (ISO 15924) Mail::Field (3pm) - Base class for manipulation of mail header fields Mail::Filter (3pm) - Filter mail through multiple subroutines Mail::Header (3pm) - manipulate mail RFC822 compliant headers Mail::Internet (3pm) - manipulate Internet format (RFC 822) mail messages Mail::SpamAssassin::SubProcBackChannel (3pm) - back-channel for communication between a master and multiple slave processes NETLINK_ROUTE [rtnetlink] (7) - Linux IPv4 routing socket Net::IP (3pm) - Perl extension for manipulating IPv4/IPv6 addresses Net::Ident (3pm) - lookup the username on the remote end of a TCP/IP connection PF_INET6 [ipv6] (7) - Linux IPv6 protocol implementation SOCK_RAW [raw] (7) - Linux IPv4 raw sockets Socket (3pm) - load the C socket.h defines and structure manipulators Symbol (3pm) - manipulate Perl symbols and their names TAP::Formatter::Color (3pm) - Run Perl test scripts with color TAP::Harness (3pm) - Run test scripts with statistics TAP::Parser::Multiplexer (3pm) - Multiplex multiple TAP::Parsers Test (3pm) - provides a simple framework for writing test scripts Test::Harness (3pm) - Run Perl standard test scripts with statistics Test::More (3pm) - yet another framework for writing test scripts Thread (3pm) - manipulate threads in Perl (for old code only) a2ps (1) - format files for printing on a PostScript printer a2ps (rpm) - Converts text and other types of files to PostScript(TM). addmntent [getmntent] (3) - get file system descriptor file entry adsl-connect (8) - Shell script to manage a PPPoE link adsl-setup (8) - Shell script to configure Roaring Penguin PPPoE client adsl-start (8) - Shell script to bring up a PPPoE link adsl-status (8) - Shell script to report on status of PPPoE link adsl-stop (8) - Shell script to shut down a PPPoE link arp (8) - manipulate the system ARP cache audit2why (8) - Translates SELinux audit messages into a description of why the access was denied autoconf (1) - Generate configuration scripts autom4te (1) - Generate files and scripts thanks to M4 avahi-autoipd (8) - IPv4LL network address configuration daemon avahi-autoipd.action [avahi-autoipd] (8) - avahi-autoipd action script avahi-dnsconfd.action [avahi-dnsconfd] (8) - avahi-dnsconfd action script base (3pm) - Establish IS-A relationship with base classes at compile time basename (1) - strip directory and suffix from filenames bindresvport (3) - bind a socket to a privileged IP port boot-scripts [boot] (7) - General description of boot sequence bsf (rpm) - Bean Scripting Framework bsh (rpm) - Lightweight Scripting for Java bunzip2 [bzip2] (1) - a block-sorting file compressor, v1.0.3 bzcat [bzip2] (1) - decompresses files to stdout bzcmp [bzdiff] (1) - compare bzip2 compressed files bzdiff (1) - compare bzip2 compressed files bzegrep [bzgrep] (1) - search possibly bzip2 compressed files for a regular expression bzfgrep [bzgrep] (1) - search possibly bzip2 compressed files for a regular expression bzgrep (1) - search possibly bzip2 compressed files for a regular expression bzip2 (1) - a block-sorting file compressor, v1.0.3 bzip2 (rpm) - A file compression utility. bzip2-libs (rpm) - Libraries for applications using bzip2 bzip2recover [bzip2] (1) - recovers data from damaged bzip2 files bzless [bzmore] (1) - file perusal filter for crt viewing of bzip2 compressed text bzmore (1) - file perusal filter for crt viewing of bzip2 compressed text capiplugin (8) - Plugin for pppd (Point-to-Point Protocol daemon) captoinfo (1m) - convert a termcap description into a terminfo description catclose (3p) - close a message catalog descriptor cdparanoia (rpm) - A Compact Disc Digital Audio (CDDA) extraction tool (or ripper). chat (8) - Automated conversational script with a modem chgrp (1) - change group ownership chgrp (1p) - change the file group ownership chown (1p) - change the file ownership chown (2) - change ownership of a file chrt (1) - manipulate real-time attributes of a process ciphers (1ssl) - SSL cipher display and cipher list tool ciptool (1) - Bluetooth Common ISDN Access Profile (CIP) close (2) - close a file descriptor close (3p) - close a file descriptor config.guess [config] (1) - guess the build system triplet config.sub [config] (1) - validate and canonicalize a configuration triplet conjure (1) - interprets and executes scripts written in the Magick Scripting Language (MSL) convert (1) - convert between image formats as well as resize an image, blur, crop, despeckle, dither, draw on, flip, join, re-sample, and much more copysign (3p) - number manipulation function copysignf [copysign] (3p) - number manipulation function copysignl [copysign] (3p) - number manipulation function coreutils (rpm) - The GNU core utilities: a set of tools commonly used in shell scripts dbiprof (1) - command-line client for DBI::ProfileData dbiproxy (1) - A proxy server for the DBD::Proxy driver dbus-launch (1) - Utility to start a message bus from a shell script desktop-file-utils (rpm) - Utilities for manipulating .desktop files device-mapper-multipath (rpm) - Tools to manage multipath devices using device-mapper. dhclient (rpm) - Provides the dhclient ISC DHCP client daemon and dhclient-script . dhclient-script (8) - DHCP client network configuration script dhparam (1ssl) - DH parameter manipulation and generation diffpp (1) - pretty-print diff outputs with GNU enscript dirfd (3) - get directory stream file descriptor dirname (1) - strip non-directory suffix from file name dprintf (3) - print to a file descriptor dsaparam (1ssl) - DSA parameter manipulation and generation dup (2) - duplicate a file descriptor dup (3p) - duplicate an open file descriptor dup2 [dup] (2) - duplicate a file descriptor dup2 [dup] (3p) - duplicate an open file descriptor dvipdf (1) - Convert TeX DVI file to PDF using ghostscript and dvips ecparam (1ssl) - EC parameter manipulation and generation ekiga (rpm) - A Gnome based SIP/H323 teleconferencing application enc (1ssl) - symmetric cipher routines encoding (3pm) - allows you to write your script in non-ascii or non-utf8 endmntent [getmntent] (3) - get file system descriptor file entry enscript (1) - convert text files to PostScript, HTML, RTF, ANSI, and overstrikes enscript (rpm) - A plain ASCII to PostScript converter. envz_strip [envz_add] (3) - environment string support epoll_create (2) - open an epoll file descriptor epoll_ctl (2) - control interface for an epoll descriptor epoll_wait (2) - wait for an I/O event on an epoll file descriptor eps2eps [ps2ps] (1) - Ghostscript PostScript distiller epsffit (1) - fit encapsulated PostScript file (EPSF) into constrained size ether_aton (3) - Ethernet address manipulation routines ether_aton_r [ether_aton] (3) - Ethernet address manipulation routines ether_hostton [ether_aton] (3) - Ethernet address manipulation routines ether_line [ether_aton] (3) - Ethernet address manipulation routines ether_ntoa [ether_aton] (3) - Ethernet address manipulation routines ether_ntoa_r [ether_aton] (3) - Ethernet address manipulation routines ether_ntohost [ether_aton] (3) - Ethernet address manipulation routines ethers (5) - Ethernet address to IP number database exec (1p) - execute commands and open, close, or copy file descriptors extractres (1) - filter to extract resources from a PostScript document faccessat (2) - change permissions of a file relative to a directory file descriptor fattach (3p) - attach a STREAMS-based file descriptor to a file in the file system name space (STREAMS) fchmodat (2) - change permissions of a file relative to a directory file descriptor fchown [chown] (2) - change ownership of a file fchownat (2) - change ownership of a file relative to a directory file descriptor fcntl (2) - manipulate file descriptor fdetach (3p) - detach a name from a STREAMS-based file descriptor (STREAMS) fdisk (8) - Partition table manipulator for Linux fdopen (3p) - associate a stream with a file descriptor fexecve (3) - execute program specified via file descriptor fifo (7) - first-in first-out special file, named pipe fileno (3p) - map a stream pointer to a file descriptor findchip (8) - checks the FIR chipset fixps (1) - sanitize PostScript files fixpsditps (1) - filter to fix Transcript psdit documents so PSUtils work fixpspps (1) - filter to fix PSPrint PostScript so PSUtils work fixtpps (1) - filter to fix Tpscript documents to work with PSUtils flock (1) - Manage locks from shell scripts fma (3) - floating-point multiply and add fma (3p) - floating-point multiply-add fmaf [fma] (3) - floating-point multiply and add fmaf [fma] (3p) - floating-point multiply-add fmal [fma] (3) - floating-point multiply and add fmal [fma] (3p) - floating-point multiply-add font2c (1) - Write PostScript Type 0 or Type 1 font as C code foomatic-combo-xml (1) - <put a short description here> foomatic-getpjloptions (8) - <put a short description here> foomatic-gswrapper (1) - foomatic wrapper for ghostscript foomatic-ppdload (8) - <put a short description here> foomatic-preferred-driver (8) - <put a short description here> foomatic-rip (1) - Universal print filter/RIP wrapper fstatat (2) - get file status relative to a directory file descriptor ftok (3) - convert a pathname and a project identifier to a System V IPC key ftok (3p) - generate an IPC key funzip (1) - filter for extracting from a ZIP archive in a pipe futimes [futimesat] (2) - change timestamps of a file relative to a directory file descriptor gai_strerror (3p) - address and name information error description gcj-dbtool (1) - Manipulate class file mapping databases for libgcj getafm (1) - create an AFM file for a PostScript font getdtablesize (2) - get descriptor table size getmntent (3) - get file system descriptor file entry getmntent_r [getmntent] (3) - get file system descriptor file entry ghostscript (rpm) - A PostScript(TM) interpreter and renderer. ghostscript-fonts (rpm) - Fonts for the Ghostscript PostScript(TM) interpreter. giflib (rpm) - Library for manipulating GIF format image files groff_font (5) - format of groff device and font description files grops (1) - PostScript driver for groff gs (1) - Ghostscript (PostScript and PDF language interpreter and previewer) gsbj [gslp] (1) - Format and print text for BubbleJet printer using ghostscript gsdj [gslp] (1) - Format and print text for DeskJet printer using ghostscript gsdj500 [gslp] (1) - Format and print text for DeskJet 500 BubbleJet using ghostscript gslj [gslp] (1) - Format and print text for LaserJet printer using ghostscript gslp (1) - Format and print text using ghostscript gsnd (1) - Run ghostscript (PostScript and PDF engine) without display gst-launch [gst-launch-0] (1) - build and run a GStreamer pipeline gst-visualise [gst-visualise-0] (1) - Run a GStreamer pipeline to display an audio visualisation gst-xmllaunch [gst-xmllaunch-0] (1) - build and run a GStreamer pipeline from an XML serialization gunzip [gzip] (1) - compress or expand files gzip (1) - compress or expand files gzip (rpm) - The GNU data compression program. hasmntopt [getmntent] (3) - get file system descriptor file entry hier (7) - Description of the file system hierarchy hipstopgm (1) - convert a HIPS file into a PGM image hpftodit (1) - create font description files for use with groff -Tlj4 hplip (rpm) - HP Linux Imaging and Printing Project hsphere-script-runner (rpm) - H-Sphere hsphere-script-runner Distribution hsphere-scripts (rpm) - H-Sphere hsphere-scripts Distribution i2cdetect (8) - detect I2C chips i2cget (8) - read from I2C/SMBus chip registers icc2ps (1) - little cms PostScript converter icmp (7) - Linux IPv4 ICMP kernel module iconv_close (3) - deallocate descriptor for character set conversion iconv_open (3) - allocate descriptor for character set conversion ijs-config (1) - script to get information about the installed version of ijs includeres (1) - filter to include resources in a PostScript document inet_addr (3p) - IPv4 address manipulation inet_addr [inet] (3) - Internet address manipulation routines inet_aton [Socket] (3pm) - load the C socket.h defines and structure manipulators inet_aton [inet] (3) - Internet address manipulation routines inet_lnaof [inet] (3) - Internet address manipulation routines inet_makeaddr [inet] (3) - Internet address manipulation routines inet_netof [inet] (3) - Internet address manipulation routines inet_network [inet] (3) - Internet address manipulation routines inet_ntoa [Socket] (3pm) - load the C socket.h defines and structure manipulators inet_ntoa [inet] (3) - Internet address manipulation routines inet_ntoa [inet_addr] (3p) - IPv4 address manipulation inet_ntop (3p) - convert IPv4 and IPv6 addresses between binary and text form inet_pton [inet_ntop] (3p) - convert IPv4 and IPv6 addresses between binary and text form infocmp (1m) - compare or print out terminfo descriptions infotocap (1m) - convert a terminfo description into a termcap description initscript (5) - script that executes inittab commands initscripts (rpm) - The inittab file and the /etc/init.d scripts. ip (7) - Linux IPv4 protocol implementation ip (8) - show / manipulate routing, devices, policy routing and tunnels ip6tables (8) - IPv6 packet filter administration ip6tables-restore (8) - Restore IPv6 Tables ip6tables-save (8) - Save IPv6 Tables ipc (2) - System V IPC system calls ipcalc (1) - perform simple manipulation of IP addresses ipcrm (1p) - remove an XSI message queue, semaphore set, or shared memory segment identifier ipcrm (8) - remove a message queue, semaphore set or shared memory id ipcs (1p) - report XSI interprocess communication facilities status ipcs (8) - provide information on ipc facilities ipppd (8) - (ISDN) Point to Point Protocol daemon iprofd (8) - Modem-register daemon iproute (rpm) - Advanced IP routing and network device configuration tools. ipsec-tools (rpm) - Tools for configuring and using IPSEC iptables (8) - administration tool for IPv4 packet filtering and NAT iptables (rpm) - iptables-1.4.1.1 iptables-restore (8) - Restore IP Tables iptables-save (8) - Save IP Tables iptables-xml (8) - Convert iptables-save format to XML iptstate (8) - A top-like display of IP Tables state table entries iptstate (rpm) - A top-like display of IP Tables state table entries iputils (rpm) - Network monitoring tools including ping. ipv6 (7) - Linux IPv6 protocol implementation irqbalance (1) - distribute hardware interrupts across processors on a multiprocessor system isastream (3p) - test a file descriptor (STREAMS) isatty (3) - does this descriptor refer to a terminal isdn_cause (7) - Description of ISDN cause messages isdnconf (1) - manipulate or read ISDN phone number config files java-1.4.2-gcj-compat (rpm) - JPackage runtime scripts for GCJ keyctl (2) - Manipulate the kernel's key management facility keymaps (5) - keyboard table descriptions for loadkeys and dumpkeys lchown [chown] (2) - change ownership of a file ldexp (3) - multiply floating-point number by integral power of 2 ldexpf [ldexp] (3) - multiply floating-point number by integral power of 2 ldexpl [ldexp] (3) - multiply floating-point number by integral power of 2 lib (3pm) - manipulate @INC at compile time libgpod (rpm) - Library to access the contents of an iPod libjpeg (rpm) - A library for manipulating JPEG image format files. libmng (rpm) - Library for Multiple-image Network Graphics support libpng (rpm) - A library of functions for manipulating PNG image format files libsemanage (rpm) - SELinux binary policy manipulation library libsepol (rpm) - SELinux binary policy manipulation library libtiff (rpm) - Library of functions for manipulating TIFF format image files linkat (2) - create a file link relative to directory file descriptors locale (7) - Description of multi-language support m2crypto (rpm) - Support for using OpenSSL in python scripts mailaddr (7) - mail addressing description makecontext (3) - manipulate user context makecontext (3p) - manipulate user contexts md (4) - Multiple Device driver aka Linux Software Raid mdmpd (8) - daemon to monitor MD multipath devices mii-tool (8) - view, manipulate media-independent interface status mkdirat (2) - create a directory relative to a directory file descriptor mkfifo (1) - make FIFOs (named pipes) mkfifo (3) - make a FIFO special file (a named pipe) mkfifoat (3) - make a FIFO (named pipe) relative to a directory file descriptor mknodat (2) - create a special or ordinary file relative to a directory file descriptor mkrfc2734 (1) - Make Linux 2.4 IP over IEEE 1394 capable mogrify (1) - resize an image, blur, crop, despeckle, dither, draw on, flip, join, re-sample, and much more. Mogrify overwrites the original image file, whereas, convert(1) writes to a different image file mq_close (3) - close a message queue descriptor msgattrib (1) - attribute matching and manipulation on message catalog multipath (8) - Device mapper target autoconfig multipathd (8) - multipath daemon multiplexer [unimplemented] (2) - unimplemented system calls mzip (1) - change protection mode and eject disk on Zip/Jaz drive nash (8) - script interpretor to interpret linuxrc images netpbm-progs (rpm) - Tools for manipulating graphics files in netpbm supported formats. netstat (8) - Print network connections, routing tables, interface statistics, masquerade connections, and multicast memberships news2mail (8) - a channel script to gateway news into email newslog (5) - description of Usenet log files nextafter (3) - floating point number manipulation nextafterf [nextafter] (3) - floating point number manipulation nextafterl [nextafter] (3) - floating point number manipulation nexttoward [nextafter] (3) - floating point number manipulation nexttowardf [nextafter] (3) - floating point number manipulation nexttowardl [nextafter] (3) - floating point number manipulation nhfsgraph (8) - Run nhfsstone over multiple loads nhfsrun (8) - Run nhfsstone over multiple loads ogonkify (1) - international support for PostScript open2 [IPC::Open2] (3pm) - open a process for both reading and writing open3 [IPC::Open3] (3pm) - open a process for reading, writing, and error handling openat (2) - open a file relative to a directory file descriptor ownership (8) - Compaq ownership tag retriever pamflip (1) - flip or rotate a PAM or PNM image pamstack (1) - stack planes of multiple PAM images into one PAM image parted (rpm) - The GNU disk partition manipulation program. pbmclean (1) - flip isolated pixels in portable bitmap pbmtextps (1) - render text into a PBM image using a postscript interpreter pbmtoepsi (1) - convert a PBM image to an encapsulated PostScript style preview bitmap pbmtolps (1) - convert PBM image to PostScript pbmtopsg3 (1) - convert PBM images to Postscript with G3 fax compression pclose (3p) - close a pipe stream to or from a process pdf2dsc (1) - generate a PostScript page list of a PDF document pdf2ps (1) - Ghostscript PDF to PostScript translator pdfopt (1) - Ghostscript PDF Optimizer perl-Archive-Tar (rpm) - A module for Perl manipulation of .tar files perl-Net-IP (rpm) - Perl module for manipulation of IPv4 and IPv6 addresses perl-Socket6 (rpm) - IPv6 related part of the C socket.h defines and structure manipulators perl-URI (rpm) - A Perl module implementing URI parsing and manipulation perlfaq4 (1) - Data Manipulation ($Revision: 1.73 $, $Date: 2005/12/31 00:54:37 $) perlipc (1) - Perl interprocess communication (signals, fifos, pipes, safe subprocesses, sockets, and semaphores) perllol (1) - Manipulating Arrays of Arrays in Perl pf2afm (1) - Make an AFM file from Postscript (PFB/PFA/PFM) font files using ghostscript pfbtopfa (1) - Convert Postscript .pfb fonts to .pfa format using ghostscript pfbtops (1) - translate a PostScript font in .pfb format to ASCII pidgin (rpm) - A Gtk+ based multiprotocol instant messaging client pipe (2) - create pipe pipe (3p) - create an interprocess channel pipe (7) - overview of pipes and FIFOs plipconfig (8) - fine tune PLIP device parameters pm-utils (rpm) - Power management utilities and scripts for CentOS pnmsplit (1) - split a multi-image PNM file into multiple single-image files pnmtops (1) - convert PNM image to PostScript poll (2) - wait for some event on a file descriptor poll (3p) - input/output multiplexing popen (3p) - initiate pipe streams to or from a process posix_trace_eventid_equal [posix_trace_eventid_get_name] (3p) - manipulate the trace event type identifier (TRACING) posix_trace_eventid_get_name (3p) - manipulate the trace event type identifier (TRACING) posix_trace_eventset_add (3p) - manipulate trace event type sets (TRACING) posix_trace_eventset_del [posix_trace_eventset_add] (3p) - manipulate trace event type sets (TRACING) posix_trace_eventset_empty [posix_trace_eventset_add] (3p) - manipulate trace event type sets (TRACING) posix_trace_eventset_fill [posix_trace_eventset_add] (3p) - manipulate trace event type sets (TRACING) posix_trace_eventset_ismember [posix_trace_eventset_add] (3p) - manipulate trace event type sets (TRACING) posix_trace_trid_eventid_open [posix_trace_eventid_get_name] (3p) - manipulate the trace event type identifier (TRACING) ppmglobe (1) - generate strips to glue onto a sphere ppoll [poll] (2) - wait for some event on a file descriptor pppstats [ipppstats] (8) - print PPP statistics pread (2) - read from or write to a file descriptor at a given offset printafm (1) - Print the metrics from a Postscript font in AFM format using ghostscript ps2ascii (1) - Ghostscript translator from PostScript or PDF to ASCII ps2epsi (1) - generate conforming Encapsulated PostScript ps2pdf (1) - Convert PostScript to PDF using ghostscript ps2pdf12 [ps2pdf] (1) - Convert PostScript to PDF 1.2 (Acrobat 3-and-later compatible) using ghostscript ps2pdf13 [ps2pdf] (1) - Convert PostScript to PDF 1.3 (Acrobat 4-and-later compatible) using ghostscript ps2pdfwr (1) - Convert PostScript to PDF without specifying CompatibilityLevel, using ghostscript ps2ps (1) - Ghostscript PostScript distiller psbook (1) - rearrange pages in PostScript file into signatures pselect [select] (2) - synchronous I/O multiplexing pselect [select] (3p) - synchronous I/O multiplexing pselect [select_tut] (2) - synchronous I/O multiplexing psfstriptable (1) - remove the embedded Unicode character table from a console font psidtopgm (1) - convert PostScript 'image' data to a PGM image psmandup [psset] (1) - insert page device request in PostScript files psmerge (1) - filter to merge several PostScript files into one psnup (1) - multiple pages per sheet psresize (1) - rescale and centre the pages of a PostScript file psselect (1) - select pages from a PostScript file pstopnm (1) - convert a PostScript file to a PNM image pstops (1) - shuffle pages in a PostScript file psutils (rpm) - PostScript Utilities pwrite [pread] (2) - read from or write to a file descriptor at a given offset qsub (1p) - submit a script quotactl (2) - manipulate disk quotas raw (7) - Linux IPv4 raw sockets rdist (rpm) - Maintains identical copies of files on multiple machines. read (2) - read from a file descriptor readlinkat (2) - read value of a symbolic link relative to a directory file descriptor readv (2) - read or write data into multiple buffers renameat (2) - rename a file relative to directory file descriptors ripemd160 [dgst] (1ssl) - message digests rngtest (1) - Check the randomness of data using FIPS 140-2 tests route (8) - show / manipulate the IP routing table rpm-libs (rpm) - Libraries for manipulating RPM packages. rpm-python (rpm) - Python bindings for apps which will manipulate RPM packages. rtnetlink (3) - Macros to manipulate rtnetlink messages rtnetlink (7) - Linux IPv4 routing socket run-with-aspell (1) - script to help use GNU Aspell as an ispell replacement run_init (8) - run an init script in the proper SELinux context runscript (1) - script interpreter for minicom sadf (1) - Display data collected by sar in multiple formats sane-niash (5) - SANE backend for scanners based on the NIASH chipset sane-scsi (5) - SCSI adapter tips for scanners sane-sm3600 (5) - SANE backend for Microtek scanners with M011 USB chip sane-sm3840 (5) - SANE backend for Microtek scanners with SCAN08 USB chip sane-usb (5) - USB configuration tips for SANE scalb (3) - multiply floating-point number by integral power of radix scalbf [scalb] (3) - multiply floating-point number by integral power of radix scalbl [scalb] (3) - multiply floating-point number by integral power of radix scalbln [scalb] (3) - multiply floating-point number by integral power of radix scalblnf [scalb] (3) - multiply floating-point number by integral power of radix scalblnl [scalb] (3) - multiply floating-point number by integral power of radix scalbn [scalb] (3) - multiply floating-point number by integral power of radix scalbnf [scalb] (3) - multiply floating-point number by integral power of radix scalbnl [scalb] (3) - multiply floating-point number by integral power of radix scanadf (1) - acquire multiple images from a scanner equipped with an ADF script (1) - make typescript of terminal session select (2) - synchronous I/O multiplexing select (3p) - synchronous I/O multiplexing select [select_tut] (2) - synchronous I/O multiplexing selinuxenabled (8) - tool to be used within shell scripts to determine if selinux is enabled sendfile (2) - transfer data between file descriptors sensors-detect (8) - detect hardware monitoring chips service (8) - run a System V init script setkey (8) - manually manipulate the IPsec SA/SP database setmntent [getmntent] (3) - get file system descriptor file entry sfdisk (8) - Partition table manipulator for Linux shlock (1) - create lock files for use in shell scripts sip (rpm) - SIP - Python/C++ Bindings Generator sockaddr_in [Socket] (3pm) - load the C socket.h defines and structure manipulators sockaddr_un [Socket] (3pm) - load the C socket.h defines and structure manipulators sound-juicer (rpm) - Clean and lean CD ripper spamassassin [spamassassin-run] (1) - simple front-end filtering script for SpamAssassin spamassassin [spamassassin-run] (3pm) - simple front-end filtering script for SpamAssassin specspo (rpm) - CentOS package descriptions, summaries, and groups. splice (2) - splice data to/from a pipe strip (1) - Discard symbols from object files strip (1p) - remove unnecessary information from executable files (DEVELOPMENT) subscriptions (5) - Default recommended subscriptions svipc (7) - System V interprocess communication mechanisms swapcontext [makecontext] (3) - manipulate user context swapcontext [makecontext] (3p) - manipulate user contexts symlinkat (2) - create a symbolic link relative to a directory file descriptor sys-unconfig (8) - shell script to reconfigure the system upon next boot sys/ipc.h [sys_ipc] (0p) - XSI interprocess communication access structure system-config-services (rpm) - system-config-services is an initscript and xinetd configuration utility tc (8) - show / manipulate traffic control settings tcl (rpm) - Tcl scripting language development environment tdx-util (8) - Tradindexed overview manipulation utility tee (2) - duplicating pipe content tic (1m) - the terminfo entry-description compiler togglesebool (8) - flip the current value of a boolean traceroute (rpm) - Traces the route taken by packets over an IPv4/IPv6 network type (1p) - write a description of command type udp (7) - User Datagram Protocol for IPv4 unlinkat (2) - remove a directory entry relative to a directory file descriptor unzip (1) - list, test and extract compressed files in a ZIP archive unzip (rpm) - A utility for unpacking zip files. unzipsfx (1) - self-extracting stub for prepending to ZIP archives urw-fonts (rpm) - Free versions of the 35 standard PostScript fonts. usernetctl (8) - allow a user to manipulate a network interface if permitted vboxmail (8) - script to send notification of new voice message vdprintf [dprintf] (3) - print to a file descriptor vgcfgbackup (8) - backup volume group descriptor area vgcfgrestore (8) - restore volume group descriptor area vigr [vipw] (8) - edit the password or group files vipw (8) - edit the password or group files vmsplice (2) - splice user pages into a pipe wcsspn (3) - advance in a wide-character string, skipping any of a set of wide characters wftopfa (1) - Convert a Wadalab base font to Postscript .PFA (or .PFB) format using ghostscript write (2) - write to a file descriptor writemain [ExtUtils::Miniperl] (3pm) - write the C code for perlmain.c writev [readv] (2) - read or write data into multiple buffers xmlcatalog (1) - Command line tool to parse and manipulate XML or SGML catalog files zcat [gzip] (1) - compress or expand files zenity (rpm) - Display dialog boxes from shell scripts zforce (1) - force a '.gz' extension on all gzip files zip (1) - package and compress (archive) files zip (rpm) - A file compression and packaging utility compatible with PKZIP. zipcloak [zip] (1) - package and compress (archive) files zipgrep (1) - search files in a ZIP archive for lines matching a pattern zipinfo (1) - list detailed information about a ZIP archive zipnote [zip] (1) - package and compress (archive) files zipsplit [zip] (1) - package and compress (archive) files
Generated by $Id: phpMan.php,v 4.49 2006/02/26 13:18:18 chedong Exp $ Author: Che Dong
On Apache/1.3.37 (Unix) mod_throttle/3.1.2 FrontPage/5.0.2.2635 mod_psoft_traffic/0.2 mod_ssl/2.8.28 OpenSSL/0.9.8b
Under GNU General Public License
2009-01-07 08:13 @38.103.63.55 Crawled by CCBot/1.0 (+http://www.commoncrawl.org/bot.html)